The correct way to use a turbine is: 1. After the car starts, do not suddenly step on the accelerator; 2. High speed operation after long-term startup, unable to immediately cut off the power supply; 3. Choose a suitable engine oil; 4. Clean the engine oil and regularly filter it; 5. Please clean the air filter on time.

After the engine is started, the turbine starts to rotate, but what we usually refer to as intervention refers to the amount of exhaust gas from the engine reaching a certain speed, which can effectively drive the turbine to rotate; The speed at which a noticeable "boost effect" is achieved is related to the engine displacement. Generally, the larger the displacement, the lower the intervention speed;

A turbocharger is actually an air compressor that increases intake by compressing air. It uses the inertia impulse of exhaust gas discharged by the engine to drive the turbine inside the turbine chamber, which in turn drives a coaxial impeller that compresses the air sent by the air filter pipeline, causing it to be pressurized and enter the cylinder.

The exhaust turbocharger utilizes the high-temperature exhaust gas from the engine, which is between 700 and 900 degrees Celsius, to drive the turbine in the turbine. The turbine shaft drives the impeller in the compressor to rotate at high speed, compressing air in a centrifugal manner

When the turbocharger encounters problems, it may also experience some abnormal phenomena. There are six main possibilities for the turbocharger to make abnormal noises: the turbocharger may be damaged (the shaft may be stuck, the impeller may be scratched), and metal friction may cause abnormal noises;